Under vehicle inspection pits are used throughout the Rail sector for the inspection and maintenance of traction and rolling Stock.
Everquip manufacture an Inspection Pit designed to meet this heavy weight challenge.
The Everquip RailPit can be supplied in any length required due to its modular construction. Integrated fixing areas for the rail chairs saves time and money and ensures a level finish for the rails.
Designed to withstand the loads of the large Class 66 freight locomotives down to regional multiple units, the RailPit is flexible to cover all bases.
Will full design and load calculations with approved zonal lighting and safety air system the RailPit helps in saving time and costs in installation and ongoing maintenance.
- RailPit is load bearing to 130000KGS in the standing area of heavy traction
- Built to accommodate standard UK rail gauge
- Working depth and length to customer specification
- RailPit comes to site fully re finished and fitted out ready for work with a minimum of downtime and involvement from 3rd party trades.
- All lighting ATX zone 2 compliant
Dimension: | Standard width 1250mm |
Loading: | 130000kgs attained for standing area of a class 66 freight locamotive |
Building regulations: | Manufactured to BS EN1090 – 1:2009 +A1:2011 |
Stairs: | Open tread galvanised stairs manufactured to BS5395 |
Ladder: | Ladder to full depth of pit manufactured to BS5395 |
Rail Track Base Plates: | |
Services connection: | 110mm spigot for connection of duct work |
External Paint : | Zinc phosphate black primer |
Internal paint: | Two pack polyurethane paint with white gloss walls and black floor |
Pit protection: | Fitted with 18mm OSB and visqueen for protection during installation |
