Heavy duty mobile column lifts for HGV, bus and coach workshops
Mobile column lifts are used to raise a commercial vehicle from its wheels, giving technicians a clear, open working space underneath and around the vehicle for inspection, servicing and repair.
Because the columns are portable rather than fixed, a single set can be moved between bays, or between depots, wherever the lifting capacity is needed. Everquip supply, install and maintain the EVQ-7500 mobile column lift, a heavy duty set rated at 7.5 tonnes per column and 30 tonnes across a set of four, suitable for HGVs, buses, coaches and mixed commercial fleets.
Mobile column lifts are usually supplied as either electro-mechanical or electro-hydraulic, and the difference is in how each type operates and holds the load. The hydraulic version, like the EVQ-7500, is usually preferred in commercial workshops because it does not rely on safety nuts, which can be expensive to replace over the life of the lift.
EVQ-7500 FEATURES:
- 30T Capacity
- Wireless technology
- 24 Volt DC control
- Adjustable Forks
- Forklift points
- Trolley wheels
- 2 batteries in each column
- 20 lifting cycles with full load
- One battery charger in each column
- 5-meter charging cable
- Batteries can be charged during operation
- Recharging time approx. 10 hours
- Synchronisation at a height difference of 50 mm
The EVQ-7500 is a wireless set of four columns designed for maximum portability. It operates without cables and is powered by rechargeable 24-volt batteries, so it can be used at any location without an external power source. The synchronising system provides smooth lifting even when the load is uneven, and the 24-volt motor and hydraulic pump deliver efficient, powerful performance.
Safety is built in. A height limit switch automatically stops the lift once it reaches its highest point, and each column has a mechanical lock. If there is a height difference of more than 50mm between any of the columns, the lift stops. An LCD display on each column shows the current lifting height, battery charge level and mode type. Each column carries both operation and emergency stop buttons, and the wireless design removes the trip hazards associated with cabled columns. The EVQ-7500 is CE certified and carries an IP54 rating, meaning it is water-resistant and suitable for use in any garage or workshop.
| Specification | EVQ-7500 |
|---|---|
| Lifting capacity | 7.5 tonnes per column / 30 tonnes per set of four |
| Max lifting height | 1700mm |
| Control | Wireless, 24V DC |
| Motor power | 2.2kW |
| Column dimensions | 1300(L) x 1100(W) x 2300(H) mm |
| Fork length | 380mm |
| Fork width | 280 – 580mm (adjustable) |
| Weight | 680kg per column |
| Lifting time | 120 seconds |
| Battery | 2 batteries per column, 20 up-and-down cycles at full load |
| Charging | One charger per column, 5-metre cable, approx. 10 hours; can be charged during operation |
| Synchronisation | Auto-stop at 50mm height difference |
| Rating | CE certified, IP54 water-resistant |
Frequently Asked Questions
How much weight can mobile column lifts lift?
The EVQ-7500 lifts 7.5 tonnes per column. A standard set of four columns therefore lifts 30 tonnes, which covers the great majority of HGVs, buses and coaches. Capacity scales with the number of columns in the set.
Are mobile column lifts suitable for HGVs and buses?
Yes. Heavy duty mobile column lifts like the EVQ-7500 are designed specifically for commercial vehicles, including HGVs, buses, coaches and refuse and municipal fleets. The adjustable forks accommodate different wheel sizes across a mixed fleet.
Are the EVQ-7500 columns cabled or wireless?
The EVQ-7500 is wireless. Each column runs on its own rechargeable 24-volt batteries, so there are no trailing cables between columns and no need for an external power source at the point of use. This removes cable trip hazards and makes moving the set around the workshop straightforward.
How long do the batteries last, and how are they charged?
Each column holds two batteries and completes 20 up-and-down cycles at full load between charges. Every column has its own charger with a 5-metre cable, and a full recharge takes approximately 10 hours. The batteries can also be charged during operation, so the set can be topped up between jobs.
How much do mobile column lifts cost?
Cost depends on the number of columns in the set and the accessories, training and servicing you need alongside the hardware. Rather than quote a figure that dates quickly, we set out exactly what a quote should include in our mobile column lift cost breakdown, so you can compare proposals fairly. For a price tailored to your fleet, contact our team for friendly expert advice.
What is the difference between electro-hydraulic and electro-mechanical column lifts?
The difference is in how the lift raises and holds the load. Electro-mechanical columns rely on safety nuts, which wear over time and can be costly to replace. Electro-hydraulic columns, like the EVQ-7500, raise the load hydraulically and do not use safety nuts, which is the main reason the hydraulic type is usually preferred in commercial workshops.
Key takeaways
- Mobile column lifts raise a commercial vehicle from its wheels, giving clear access underneath, and can be moved between bays or depots.
- The Everquip EVQ-7500 is a heavy duty set rated at 7.5 tonnes per column and 30 tonnes across four columns, suitable for HGVs, buses and coaches.
- It is fully wireless and battery-powered, so no external power or trailing cables are needed at the point of use.
- Safety features include a 50mm synchronisation auto-stop, a height limit switch, mechanical column locks and per-column emergency stops.
- Mobile columns suit flexible, multi-site and mixed-fleet operations, but ceiling height, floor condition and power supply should be checked first.
